How To Operate iStick Basic Correctly?
1) Assembling:
1.First screw the atomizer head onto the atomizer base tightly;2.Next put together atomizer base, atomizer tube and mouthpiece;
3.Then screw the GS Air 2 atomizer onto the magnetic 510 connector tightly;
4.Finally put the GS Air 2 atomizer into the iStick basic.
2) E-liquid Filling:
1.First pull out the atomizer from the iStick basic;
2.Next unscrew the atomizer base off the atomizer;
3.Then slowly fill the e-liquid into the atomizer along the tube;
4.Finally screw the atomizer base onto the atomizer again.
Note:
a) Please don’t overfill and make sure the liquid level is between 10%-90%;
b) Please first drip a few drops of e-liquid directly into the wick so as to make the atomizer head fully saturated before vaping.
3) Air Inflow Adjustment:
The amount of air inflow can be easily adjusted by rotating the airflow control ring on the atomizer base so as to get different vaping experiences.
4) Power on/off:
Press the button five times in quick succession within two seconds, the white button light will flash five times to show the Eleaf iStick basic Starter Kit is ready for use. In the same way, the device can also be turned off.
5) Vaping: Long press the button to take a puff.
6) Charging: Charge the device by connecting it with wall adapter or computer via the USB cable. The button light will turn red when the device is charging and the light will go out when fully charged. It will take about three hours to get a full charge via 1A wall adapter.
No comments