Eleaf iStick Pico 25 User Manual

How to Power on/off

Screw off the battery cap, put one high-rate 18650 battery (positive side down and negative side up) into iStick Pico 25 and finally screw the battery cap on. The device can be powered on/off by pressing the fire button 5 times.

How to Vaping

when the device is powered on, long press the fire button to take a puff.

How to Stealth on/off

press the fire button and “-” button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button once to see current setting.

How to Adjustment buttons lock/unlock
keep pressing “+” button and “-” button simultaneously for two seconds when the Eleaf iStick Pico 25 Starter Kit is powered on, then the adjustment buttons will be locked and the screen will display “Key Lock”. In the same way, the adjustment buttons can be unlocked and the screen will display “Key Unlock”. Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan.

How to Switch display mode
keep pressing “+” button and “-” button simultaneously for two seconds when the device is powered off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation.

How to Put Custom Logo in the Device
Download the file on our official website, plug the device in with USB cable to a computer. Then click “LOGO” and open the image you choose to put it in the device. Finally press the fire button twice in quick succession when the device is powered on to enter logo on/off interface and press “+” button or “-” button once to turn on/off logo.

How to Charge 
The battery power indicator on the screen of the device will keep flashing when the remaining power of the 18650 battery is less than 10%. The 18650 battery can be charged in the device through USB port via wall adapter or a computer or charged with an external battery charger. If the 18650 battery is charged in the device, the battery bar on the screen will keep flashing during charging and the screen will go out when fully charged.

How to Upgrade Firmware 
The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.