Eleaf Ijust NexGen Instruction Manual
The iJust NexGen, a new all-in-one style setup, skillfully packs a built-in 3000mAh battery with a 2ml tank in a tube-like unit.
How to Power on/ off
Press the button 5 times in quick succession within two seconds, and the indicator light flashes 5 times to show the device is powered on. In the same way, it can also be turned off.
How to Vaping
Keep holding the button to take a puff when the device is powered on.
How to Charge
The Eleaf iJust NexGen All-in-one Kit can be charged by connecting it with a wall adapter or a computer via the USB cable. The light is red during charging and goes out when fully charged.
How to Assemble
1. First drip a few drops of e-liquid directly into the coil to make it fully saturated before first use;
2. Then screw the primed coil onto the atomizer base tightly;
3. Put glass tube, top cap and mouthpiece on;
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-liquid into the tank through the port, and then close the retractable top after filling; (Note: please don’t overfill.)
5. The airflow can be adjusted by turning the airflow control ring on the atomizer base;
6. Finally the iJust NexGen is ready for use.
How to Power on/ off
Press the button 5 times in quick succession within two seconds, and the indicator light flashes 5 times to show the device is powered on. In the same way, it can also be turned off.
How to Vaping
Keep holding the button to take a puff when the device is powered on.
How to Charge
The Eleaf iJust NexGen All-in-one Kit can be charged by connecting it with a wall adapter or a computer via the USB cable. The light is red during charging and goes out when fully charged.
How to Assemble
1. First drip a few drops of e-liquid directly into the coil to make it fully saturated before first use;
2. Then screw the primed coil onto the atomizer base tightly;
3. Put glass tube, top cap and mouthpiece on;
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-liquid into the tank through the port, and then close the retractable top after filling; (Note: please don’t overfill.)
5. The airflow can be adjusted by turning the airflow control ring on the atomizer base;
6. Finally the iJust NexGen is ready for use.
No comments