Header Ads

The properties of Eleaf iStick QC 200W

Have you found some properties of Eleaf iStick QC 200W? Let's have a look.

Atomizer Protection: Each time when vaping time exceeds 10 seconds, the output shuts off automatically with "Over 10s" display on the screen.

Atomizer Low Alert: when the resistance of coil is lower than 0.1ohm in VW/Smart mode or lower than 0.05ohm in TC modes, the screen will display "Atomizer Low".

Atomizer Short-circuit & No Atomizer Protection: When atomizer short-circuit occurs, the OLED screen will display "Atomizer Short". The screen will display "No Atomizer" when there is no atomizer connected.

Low-voltage Protection: When the voltage of the device is below 3.3V, the OLED screen will display "Lock". and the output will cut off automatically. Charge the device to reactivate it.

Temperature Protection: In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3)mode, when the actual temperature of coil reaches the set temperature, the screen will display "Temp Protection".

Temperature Alert: If the temperature of device is over alert temperature, the output will shut off automatically and the screen will display "Device Too Hot". You can continue to vape after it colls down.


No comments

Powered by Blogger.